How to Cut Pavers with Angle Grinder? [Best Way to Cut Pavers]

Paver is an important and most cutting material. So many people found themselves hassled enough to cut down the pavers professionally. Cutting paving stones can be challenging, but it isn’t totally impossible. However, if you think that you may also find yourself having problems while cutting the pavers, this article is just perfect for you.

 

So, how to cut pavers with an angle grinder? To answer your question in detail, I discuss three methods. Just follow the below anyone method and cut your different types of pavers without any problems. So, let’s check out the following section.

 

 

What is the Right Tool for Cutting Pavers?

It is important to choose the right tool to cut down the pavers. If you are a beginner or recently started to cut the pavers, then it may cause confusion for you. Don’t worry; you can check out the following tools which you need to cut the pavers.

• Angle Grinder
• A Diamond Disc
• Wrench (for anchoring and removing wheels)
• Safety Equipment (gloves, eye protection, mask, and others)
• A Cleaner (You can choose brush)

 

 

 

How to Cut Pavers with Angle Grinder?

If you recently started to cut pavers or are looking for an alternative method to cut down the pavers with an angle grinder, then this section is much better for you. However, let’s check out the following steps to cut your pavers with an angle grinder.

 

Step 1: Wear Protective Equipment

Before starting to cut the pavers, you should wear essential components so that you can protect yourself. However, you should wear gloves, eye-protective, a mask, and other things. So, wear these components and then start to cut pavers.

 

Step 2: Choose the Important Tools

You may better know which size pave you need to cut. You will discover two types of angle grinder cutting wheels for pavers with two different sizes, such as 115mm and 230mm. Choose your own size before cutting the pavers comfortably and professionally.

 

Step 3: Get a Perfect Disc

You should not go for a cheap quality disc if you want to work like a pro person. However, if you want to get a clean and effective cutting experience, I would love to recommend you to choose a diamond disc. A diamond disc is the last lover for pavers cutting than other discs.

 

Step 4: Mark Your Paver Cutting Areas

It is a simple task which you need to complete. Take the measuring tape and mark the area where you want to cut it down. You should mark the proper way with the right size. I hope that you can understand whatever I say to you about this section.

 

Step 5: Correctly Setting Materials

Before cutting down the materials, you need to check out that your angle grinder and disc properly anchor and position the materials in the right way. So, before starting to work, check out this section the proper way.

 

Step 6: Pavers Cutting Process

Now, you completed all of the processes and are ready to cut down the pavers. Well, take your angle grinder and start to cut in the marking area, which you previously did. Don’t be hurried; take your time and cut the pavers carefully.

 

 

 

 

How to Cut Concrete Pavers with Angle Grinder?

When you think of cutting concrete pavers with an angle grinder, then you can check out the below process to cut easily and comfortably. I hope that you enjoy the process a lot.

 

Step 1: Wear Protective Components

First of all, you need to wear some important elements such as a mask, gloves, goggles, and others so that you can protect yourself.

 

Step 2: Mark the Area Where You Want to Cut

Now, you should mark the area to cut down the concrete pavers. However, you can use pencil and tape measures to properly mark and cut the paver’s concrete. It is a very simple task, but you need to do it carefully because it depends on your demanding size.

 

Step 3: Anchor the Wheels with Angle Grinder

After that, you need to anchor the angle grinder with wheels properly. However, you can use a wrench to remove old wheels and anchor the new ones. Whatever, I would love to recommend you choose the best angle grinder for cutting pavers so that you can hassle-free cut the concrete pavers.

 

Step 4: Cutting process

Turn on your angle grinder and start to cut the concrete pavers. Take your time and cut only the marking areas. You should focus on the mark because if you don’t cut down the concrete pavers, you don’t get your desired shape. I hope that you can understand.

 

Step 5: Finish the Concrete Pavers Cut

Now, you already cut down the concrete pavers. Note, you should always clean the area where you cut down the pavers because of multiple reasons. You can also clean your blade or wheels after cutting the pavers so that you can use the further blade time.

 

 

 

 

How to Cut Brick Pavers with Angle Grinder?

 

Like the above methods cutting the brick pavers look like the same method. However, for your helping hand, I also make a simple process for you to cut bricks paver properly using an angle grinder. So, let’s get started with the method right now.

 

Step 1: Buy Some Required Tool

• Gloves
• Angle Grinder
• Diamond Wheels
• Eye Protector (goggles)
• Masks

 

Step 2: Mark the Brick Pavers

Before cutting the brick pavers, you need to mark the area properly. Marking helps you to cut professionally in the right shape. Whatever you can use measuring tape and pencil or marker to mark the area properly.

 

Step 3: Prepare Your Angle Grinder & Wheels

From this section, you need to anchor your angle grinder and the wheels properly. Make sure that your wheel and angle grinder anchor properly and tightly. To tight the wheel, you can use a wrench or other tools. You should also re-check this section because of its strong safety.

 

Step 4: Start to Cut the Brick Pavers

After completing all of the above processes and maintain safety, it is time to cut the brick pavers properly. However, start your angle grinder and cut down the brick pavers in the marking area without any hassles. So, what do you want else from this section? Cut down the materials carefully.

 

 

 

Angle Grinder or Circular Saw for Cutting Pavers? [What Is the Best]

A person needs to choose the right tool for cutting the pavers. There are most two common tools you will discover on the market which are capable of cutting pavers. But, it is expensive for a person to cut down the pavers using these two tools combined.

 

However, I am using an angle grinder for cutting pavers. I think an angle grinder is much better than a circular saw because of several reasons. However, let’s check out the following chart and understand why an angle grinder is much better to cut pavers than a circular saw.

 

Angle Grinder	Circular Saw
An angle grinder is inexpensive	A circular saw is an expensive tool
Easy to assemble and start to work	Tricky enough to assemble and start to work
Fast and effectively work	Slowly work
Highly portable	Tricky enough to portable

 

 

 

Frequently Ask Questions

Q: Can I cut pavers with an angle grinder?

A: Of course, you can cut your pavers using an angle grinder. You will get high-performance and a couple of advantages to cut down the pavers with an angle grinder. Without thinking more, cut down your pavers using an angle grinder.

 

Q: What kind of blade do I need to cut pavers?

A: You can choose multiple blades for cutting the pavers. But my team and I used 4 different wheels, and I think the blades are truly much better than others. So, you can check out the following blade for cutting pavers.

 

• DEWALT DW4725 Diamond Blade: This blade comes from DEWALT. You will get everything that helps you cut any type of paves properly without any hassles.
• ROK 4-1/2-inch Diamond Saw Blade: If you already have a saw and want to cut pavers, then you can check out this unit. It helps you a lot to cut any type of pavers using the saw.
• DEWALT DW4701 Diamond Blade: This is another DEWALT blade that is specially built for an angle grinder to cut the pavers. So, you can choose this blade to cut the pavers properly.
• Delta Diamond Boss Hong Wheel: It is also a popular tool that helps customers cut the pavers for a long time. So, you can also consider this unit for cutting any type of paver.

Q: Can I cut stone slabs with an angle grinder?

A: Yes you can cut stone slabs easily with an electric angle grinder. Wet or dry conditions can make difference while cutting materials such as concrete, marble, granite, stone. So you need to choose the best angle grinder which has a combination of aggressive cutting ability with a fine, clean-cut, and no burning of the segments same time. A motor that draws 5 to 9 amps is strong enough for cutting stones. So while choosing a 4- or 4 4/2-inch grinder, keep this fact also in mind.

Is It Clear to you?

I hope that you have already cleared your confusion and cut down the pavers which you have. When I research how to cut pavers with angle grinders on this question, I think that the upper three methods are truly much better for you.

 

Each of the above methods is popular, and the plumbers also use the method. Whatever, I recommend you to choose DEWALT DW4725 diamond blade to cut any type of pavers. This blade also provides you an excellent performance.

 

Most Popular Posts:

• How to Cut Asphalt With A Grinder?
• How to Cut Cast Iron Pipe With A Grinder?
• How to Sharpen Mower Blades with Grinder?